LulaBelle Handicrafts

the place for crafty inspiration

Mini Fall Bunting Tutorial

Don’t you just love a bunting? Apparently lots of us do because they are all over Pinterest! I recently made a Fall Wreath that I embellished with a miniature bunting I crafted myself. Here’s the details if you want to make your own.


  • Twine
  • Scissors
  • Brown Cardstock
  • Fall Scrapbook Paper from the Martha Stewart Animal Masquerade Paper Pad
  • Slice Elite Cutter, Stencils, or Punches
  • Happy Trails Design Card
  • Parties Design Card
  • Martha Stewart Ballpoint Glue Pen
  • Crop-A-Dile

Step One:

Determine the length of the space that your bunting will be covering, and cut a piece of twine the appropriate length. Mine was intended to embellish my Fall Wreath, so I cut my twine 12 in. long.

Step Two:

Using either an electronic cutting machine, stencil, or punch, cut 4 triangles out of the brown cardstock. The size of my triangles was determined by the length of my twine. I cut a few different sizes out with my Slice Elite using the pennant shape on the Parties Design Card to see which size would allow me to fit four triangles across my twine. I ended up using the 2 in. triangle.

Step Three:

Using either an electronic cutting machine, stencil, or punch, cut out “fall” from the Martha Stewart Animal Masquerade Scrapbook Paper of your choosing. I used the scraps left over from decoupaging my Fall Wreath. To cut my letters, I used the Happy Trails Design Card for my Slice Elite in the 1 1/2 in. size.

Step Four:

Glue the letters to the triangles. I like to use my Martha Stewart Ballpoint Glue Pen for little, detailed pieces like this. I can easily control the amount of glue, and it adheres paper to each other wonderfully. I highly recommend you invest in one of these if you don’t have one.

Step Four

Step Five:

Place the 4 cardstock triangles on top of each other, and use a Crop-A-Dile to punch out 1/8 in. holes in each of the top corners of them. By stacking the triangles, you ensure that holes will be in the same place on each of them. The Crop-A-Dile easily punches through 4 sheets of cardstock.

Step Five

Step Six:

Thread the triangles onto your twine.

Here’s the finished product.

Mini Fall Bunting

Isn’t it adorable? I’m sure you’ll be able to think of loads of ideas for this mini bunting other than just adorning a wreath. Happy crafting!

Leave a comment »

DIY Fall Wreath with Martha Stewart Paper

While I was at the craft store last weekend, I happened across Martha Stewart’s Halloween crafting line. She has really outdone herself this year, mainly because black cats are everywhere! You might have noticed that my Kiko aka LulaBelle is a beautiful, black kitty. I adore all things black cat-related because of her. Needless to say, I bought the Animal Masquerade paper pad.

Animal Masquerade Paper Pad

I fully intended to make a Halloween wreath with this paper until I remembered that my fall wreath ain’t that great. There is a beautiful paper in this pad full of fall foliage and acorns that was just begging to be made into a wreath. Fear not. I am confident that I will have several more projects to come featuring the other papers. I did after all buy it because of the black cats!


Step One:

Paint your wreath form in a color that coordinates with your paper. I used Martha Stewart Crafts’ Multi-Surface Metallic in Rust. You’ll only need to paint one side and the edges because the other side will be covered with your fall paper. My wreath needed two coats for good coverage.

Step One

Here’s two of my favorite tips for working with craft paint. Use a clean yogurt container to hold your paint, and cover it with Glad Press ‘n Seal to keep your paint wet in between coats.

Painting Tips

Step Two:

With a foam brush, cover the unpainted side of your wreath with a generous layer of Mod Podge.

Step Two

Then place your paper on top, making sure to smooth out any wrinkles while pressing all of the paper firmly onto the wreath form. Let it dry.

Step Three:

Flip your paper-covered wreath form over, and cut away the excess paper using an Exacto knife.

Step Three

Try to get as close to the edges of the wreath form as possible.

Step Three B

As always, use your Exacto knife on an appropriate surface to avoid cutting up your table or counter top. Hang onto your paper scraps, especially the large circle you removed from the center of the wreath form. You can surely find something to do with paper this pretty, regardless of the shape or size.

Step Four (optional):

I didn’t particularly care for the write edges around my wreath where the paper had been cut. I used a brown ink pad to tap around all of the edges to give it a more finished look.

Step Four

My square ink pad didn’t liked the curves of the inside of the wreath, so I switched to a rectangular one. It worked much better. If you do this step, make sure to let the ink dry completely. Otherwise your hands will be covered in it while you finish up the wreath.

Step Five:

One of the great things about the wooden wreath form that used for this project are the holes in it. To attach the twine that would serve to hang my wreath, I flipped it over and pierced the paper through the hole that was closest to top and center of the wreath. I found it easier to thread the twine through the hole by using one of my large-eyed knitting needles.

Step Five

You may be luckier than me and not to use a needle. I then tied the twine in a square knot around the wreath and also at the ends of the twine to create a loop for hanging.

Step Six (optional):

The wreath is certainly lovely and ready for hanging at this point, but a little embellishment never hurt any craft. I made a mini bunting with some of my leftover paper scraps.

Step Six

You could also attach glitter letters to spell a word of your choosing. Another option might be adding beautiful fall leaves. You could even make an acorn out of felt, and it would be precious. When it comes to embellishing a project, do what you like and make it your own.

Fall Wreath

Happy fall crafting!


Felt Leaf Garland

With Thanksgiving only a couple of days away, my house needed a touch more fall pizzaz, so I searched on my Halloween and Fall Craftiness Pinterest board for something quick and easy. Who really has time to make something super involved this week? Not me! I chose a felt leaf garland from a Beautiful Mess. They have a great tutorial for it on their website. This craft is one that the kids can do, too. You might even have them do it while you’re cooking to keep them occupied and out of the kitchen!

If you have kids in the house, you’ll probably find everything you need to make this garland from your school project leftovers – felt, chalk, scissors, yarn, and a large needle. I chose felt pieces in fall colors and added one punch of color with turquoise. To make the leaves, I used a stencil of sorts. I found a piece of cardstock on which I had previously cut out leaves with my Slice Elite. You can certainly make your own stencil or simply freehand the leaves if you are a better drawer than me. I find that the best way to mark on felt is with basic, white chalk.

With my leaves drawn on my felt, I cut them out and started stitching. Rummage through your yarn stash to find one that coordinates with your felt. I used a size 18 tapestry needle and a running stitch to make the leaf veins. Because the end of this needle is pretty blunt, you can have the kids help out with the stitching, too.

The hardest part of this project was figuring out where to hang it. My Mishka quickly discovered it on a bookcase and had it in her paws. If I get bored with this decoration, it will apparently make for a great cat toy!

Leave a comment »